INSTALL INSTRUCTIONS C-VS-1100-F150
VEHICLE SPECIFIC CONSOLE
2004-2007 FORD F-150 PICK UP
TOOLS REQUIRED:
Metric Socket Set
Ratcheting Wrench
Panel Pulling Tool
1/8” Drill Bit
Phillips Screwdriver
Power Drill
HARDWARE:
QTY DESCRIPTION
PART #
6
1
#8 x ¾” Phillip Sheet Metal Screws
C-HK-1 (32 Torx Screws)
GSM33189
CM86508
SUB ASSEMBLY:
1. Remove necessary components to access mounting area.
• Armrest Pad (3 Metric Hex Head screws)
• Forward Console Face Plate (Panel Pulling Tool)
• Rear Console Face Plate (Panel Pulling Tool & 2 Metric Hex Head Screws)
INSTALLATION:
1. ATTACH HAVIS-SHIELDS CONSOLE:
• Position console plate as shown in the above view.
• Pre-drill mounting holes with 1/8” drill bit.
• Attach console plate using #8 x ¾” Sheet Metal Screws.
|